Top quality Hammer head zinc plated M6 T bolts from China
Hammer head zinc plated M6 T bolts for many applications.
China Hammer head zinc plated M6 T bolts factory and manufacturer, Chinese bolts and nuts supplier.
Name: Hammer head zinc plated M6 T bolts
Material: ASTM ,mild steel,Stainless steel 304 ; Carbon steel ; Alloy steel
SIZE : M6-M20
Length : 50mm-12000mm or non-standard as request&design
Grade: 4.8, 6.8, 8.8, 10.9, 12.9
Thread Type : coarse thread or fine thread
Thread Pitch:1.5mm,1.75mm,2.0mm,3.0mm or as your request(right/left threaded)
Finishing: Bake paint; Black Oxide; Zinc Plated; Phosphate; galvanized ectrophoresis; Dacromet.
Standards : GB, DIN, ISO, ANSI/ASTM, B7, BS, JIS
Lead Time: 7 working days for 50 tons.
NON-Standards : OEM is available if you provide a drawing or sample.
Productive process : Rod→Acid cleaning→Draw wire→Anneal→molding→Rolling thread→Heat treatment→Surface treat→Packing.
Quantity control : Raw material inspect→process monitoring→Product test→Packaging check.
Brief for Our Bolt Project:
Factory ability/ Production capacity: Monthly 1000 tons of bolts produced, more than 8000 different sizes of hub bolts wheel bolts, suspension u bolts, leaf spring center bolts, hex bolts, screws, anchor bolts, thread rods, bolt tools and nuts developed already, with application to various fields like automobile industry, Oil & Gas engineering, petro-chemical engineering, power station,offshore engineering, nuclear engineering, heavy machinery, skyscraper etc.
MOQ: 500 kgs for each bolts.
Packing: firstly by plastic bags, then into cartons, then on standard export pallets, finally into seaway containers. 25 kgs per carton; 1.5 ton per pallet; less than 26 tons per container.
Lead time: for common goods, normally 0-10 working days; for inventory goods, 0-5 working days; for customized goods, 0-40 working days.
Product Assurance/ Claim solution: The burden of proofs is on the buyer side. If proofs for quantity shortage or quality defects are confirmed by the supplier, 100% complement and replacement are guaranteed. The cost could be negotiated and reasonably shared by both parties. Improving the long-term mutual benefit co-operation is the only principle for claim treatment.
In below respects, we are superior to other bolt factories:
In China, our factories have been doing serious all-round internal quality inspection for hub bolts wheel bolts, suspension u bolts, leaf spring center bolts, hex bolts, screws, anchor bolts, thread rods, bolt tools and nuts, with a defective rate less than 3/10000. GoodGave warrants all bolts sold on fitness for purpose and dimensional and material compliance.
More than 98 customers from 50 countries in the world have accepted our hub bolts wheel bolts, suspension u bolts, leaf spring center bolts, hex bolts, screws, anchor bolts, thread rods, bolt tools, nuts and our service. We have an export team with 10 years experience in this field, who are extremely familiar with bolt specification, inspection, logistics, paperwork and certification. They can think what you care about, do what you entrust.
For common bolts, based on the same quality level, our price will be 2%--15% less than other factories.
We sincerely welcome domestic and foreign wholesalers and retailers to contact us for new co-operation!